Packaging

Label Size: 2.75×7

Lid Size: 38mm

The 200cc bottle can fit up to 90 double zero capsules and 100 single zero capsules comfortable with cotton. This is a good option if you still want to go with 60 capsules of either size but create a larger shelf presence.

Label Size: 2.75×7

Lid Size: 45mm

The 225cc bottle can fit 120 double zero capsules without room for cotton. This give a clean look and works well for many people. 100 double zero capsules if you want cotton in the bottle.

Label Size: Varies depending on customer preference

Lid Size: 45mm

Label Size: 3.25″x9.5″

Lid Size: 45mm

The most capsules that we put into a 500cc has been 240 capsules. Very large bottle with great shelf presence.

Label Size: 2.2×11.25

Lid Size: 89mm (available colors are black, pink, blue, green, silver, yellow, green, purple and red)

The 16oz bottle is great for medium volume powders. The maximum amount of volume we usually put in this container is 240 grams depending on the density of the powder. Powders that have more hygroscopic ingredients that require a significant amount of silicon dioxide to prevent clumping should be moved up to the next size. 240 grams of a more granular pre workout type powder fits much differently than say a powder for a nitric oxide product which can take up to 50% in additional space.

Label Size: 3.125×11.25

Lid Size: 89mm (available colors are black, pink, blue, green, silver, yellow, green, purple and red)

The 19/20oz bottle is probably the most widely used jar for pre workout powders. It can comfortable fit up to 375 grams of a granular powder. Powders that have more hygroscopic ingredients that require a significant amount of silicon dioxide to prevent clumping should be moved up to the next size.

Label Size: 4×11.25 HDPE: Can be sized the same or slightly larger depending on customer preference.

Lid Size: 89mm (available colors are black, pink, blue, green, silver, yellow, green, purple and red)

The 25oz jar is great if you want to create a better shelf presence for a product that could alternatively fit in a smaller jar. It can comfortable fit up to 500 grams of a granular powder.  Powders that have more hygroscopic ingredients that require a significant amount of silicon dioxide to prevent clumping should be moved up to the next size.

Label Size: 3×15(there are ridges on the top and bottom of this jar. This sizing allows for a comfortable fit for the label)

Lid Size: 120mm (colors available are black and white)

The 44oz jar can comfortable fit up to 550-600 grams of a granular powder. We wouldn’t suggest going over 550 grams. Powders that have more hygroscopic ingredients that require a significant amount of silicon dioxide to prevent clumping should be moved up to the next size.

Label Size: 4×15(there are ridges on the top and bottom of this jar. This sizing allows for a comfortable fit for the label)

Lid Size: 120mm(colors available are black and white)

The 55oz jar can comfortable fit up to 600-700 grams of a granular powder. We wouldn’t suggest going over 650 grams. Powders that have more hygroscopic ingredients that require a significant amount of silicon dioxide to prevent clumping should be moved up to the next size.

Label Size (5.6 x 13.25 inches – the length can go up to 17.85 on these jars)

Lid Size: 110mm for the 128oz (available colors are black, white, blue and silver) 120mm for the 128oz (available colors are black and white with deep skirt options)

The 128oz jar can comfortable fit up to 1500-2000 grams of a granular powder. We wouldn’t suggest going over 1500 grams. This is the most common and popular jar for the 2lb proteins.  Powders that have more hygroscopic ingredients that require a significant amount of silicon dioxide to prevent clumping should be moved up to the next size.

Label Size (6×18-the length can go up to 22.35 on these jars)

Lid Size: 120mm (available colors are black and white)

The 2-gallon jar can comfortable fit up to 2240-3500 grams of a granular powder. We wouldn’t suggest going over 3000 grams. This is the most common and popular jar for the 5lb proteins.  Powders that have more hygroscopic ingredients that require a significant amount of silicon dioxide to prevent clumping should be moved up to the next size which would be a bucket.